18-522 CMW

Part #: 235-18-522

Request 3D Model

The 500 Series Offset Holders are available with different offsets and engagement angles to fit any job. The ejector style allows for easy removal of the electrode. The part is nickel plated to resist wear. These holders are commonly used with Rocker Arm and Pedestal Type welders.

RMWA Class 3 material is high strength copper alloy recommended for structural secondary components and electrode holders subjected to high forces. This is a heat treatable alloy used in the fully heat treated condition.

The mounting shank length is 4.000 IN
The mounting shank diameter is 1 IN
The part holds a subcomponent via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
The offset is 4 IN
The engagement angle is 90 Degrees
Ejector Type Part
The part is nickel plated to protect against corrosion.

Specifications

RWMA Material	RWMA Class 3
Shank Diameter [J]	1
RWMA Taper [T]	5RW
Offset [H]	4.0000
Shank Length [G]	4.000
Unit of Measure	IN
Engagement Angle [D]	90.0
Ejector Type	Yes
Nickel Plated	Yes