• 16-3774-M6 CMW
  • Sketch for 16-3774-M6 CMW

16-3774-M6 CMW

Part #: 275-16-3774-M6

Request 3D Model

Request 3D Model


Non-Piloted Nut Electrodes are for welding nuts. The part has an insulated, spring loaded pilot that retracts when it makes contact with the upper electrode which prevents damage.

A refractory metal face is made of RWMA Class 11 (75% tungsten, 25% copper) (ASTM 702 C1D) is brazed onto the base material. This face is typically used for welding at higher pressure and heat common with projection welding.

  • The overall length is 2.500 IN
  • The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The weld face is 0.625 IN
  • The part has a spring loaded insulated pilot for welding a 6 mm nut.
  • The diameter of the pin is 0.186 IN
  • The diameter of the pilot is 0.25 IN.

Specifications

Face Refractory Material RWMA Class 11 - 10W
RWMA Material Type RWMA Class 2 - C18200
Engagement to Holder [S] 5RW
Overall Length [A] 2.50000
Weld Face Diameter [B] 0.625
Pilot Diameter [J] 0.25000
Pin Diameter [P] 0.1860
Pilot Stickout [L] 0.3120
For Nut Size 6 mm
Refractory Material Thickness [I] 0.250
Unit of Measure IN
Spring Included Yes

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov