18-767 CMW

Part #: 290-18-767

Request 3D Model

Request 3D Model

Electrode Angle Adapters are used to improve the holder life and flexibility by allowing users to select different angles for tooling setups. The adapter can also be replaced when the taper wears out. The parts are desinged for use CMW Straight Holders.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overall length is 1.625 IN
  • The part width is 1.063 IN
  • The part mounts via 7/8 - 14 male threads.
  • The part holds a subcomponent via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
  • The offset is 1.281 IN
  • The engagement angle is 30 Degrees
  • The part is nickel plated to protect against corrosion.
  • Ejector Type Part


RWMA Material Type RWMA Class 2
Engagement to Holder 7/8 - 14
RWMA Taper 5RW
Overall Length 2.37600
Offset 1.2810
Thread Length 0.5625
Body Length 1.5630
Body Width 1.06300
Unit of Measure IN
Engagement Angle 30.0
Ejector Type Yes
O-ring Included Yes
Thread Type Male

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov