18-764 CMW

Part #: 290-18-764

Request 3D Model

Request 3D Model


Electrode Angle Adapters are used to improve the holder life and flexibility by allowing users to select different angles for tooling setups. The adapter can also be replaced when the taper wears out. The parts are desinged for use CMW Straight Holders.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overall length is 1.625 IN
  • The part width is 1.000 IN
  • The part mounts via 7/8 - 14 male threads.
  • The part holds a subcomponent via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The offset is 0.594 IN
  • The engagement angle is 90 Degrees
  • The part is nickel plated to protect against corrosion.
  • Ejector Type Part

Specifications

RWMA Material Type RWMA Class 2
Engagement to Holder 7/8 - 14
RWMA Taper 4RW
Overall Length 1.15700
Offset 0.5940
Thread Length 0.5625
Body Length 1.3130
Body Width 1.00000
Unit of Measure IN
Engagement Angle 90.0
Ejector Type Yes
O-ring Included Yes
Thread Type Male

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov